HPC-7316 is suitable for data transmission, protocol conversion, data analysis and storage, and self-control in fields such as power, transportation, energy, and industrial automation. Supports multiple DTUs/management machines/secondary development. Bare metal machines support multiple 485 serial ports, network ports, 15KV air discharge, and 8KV contact discharge serial port isolation protection. Built in terminal resistors can be set based on ARM V8 Cortex-A53 architecture processor. System frequency: 1000MHz, 512MB DDR3 DRAM, 8GB eMMC FLASH, 16 RS232/485 interfaces, 4 DI&4 DO dry wet contacts, optional 2 10/100/1000M adaptive Ethernet ports, supporting -40~80 ℃ industrial wide temperature range
Hardware Architecture
Hardware architecture: ARM architecture, Cortex-A53 core
Main frequency: 1GHz
RAM:512MB DDR3 DRAM
Flash:32M SPI Nor Flash 8GB eMMC Flash,
Support SD card expansion
system parameter
Kernel version: Linux buildroot 4.19
Compiler: gcc version 8.4.0
Software features: SSH, SCP, ntupdate, etc
Serial port parameters
RS485 interface: 16 channels
Serial port signal: S - (B), S (A), GND
Serial port speed: 1200bps~115200bps
Flow control: No flow control XON/XOFF
Checkpoints: None, Even, Odd, Space, Mark
Data bits: 5, 6, 7, 8
Stop position: 1, 1.5, 2
Serial port protection: 15KV ESD protection, 2.5KV optoelectronic isolation protection
Serial port working mode: TCP Client, TCP Server, UDP
Virtual serial port: xport virtual serial port, supports 32-bit and 64 bit systems;
Serial port concurrency: Multiple serial ports can work in full duplex simultaneously, complement each other's effects, and can work under different serial port parameters
Support DTU mode: Supports heartbeat setting
Transparent transmission&customized protocol: default transparent transmission, optional customized forwarding protocol;
Network parameters
Ethernet ports: 2;
Network speed: 10/100/1000Mbps adaptive, supports auto MDI/MDIX
Port protection: 15KV ESD, 2.5KV electromagnetic isolation protection
Supports IPv4 and IPv6 protocol Console ports
Interface form: RJ45
Baud rate: 115200bps
Interface definition: 3->TXD, 4&5->GND, 6->RXD
Debugging port: J8 pin, TTL signal (requires opening the chassis) I/O
DI: 4-channel, dry contact;
DO: 4-channel, dry contact, 220VAC@10A USB interface (optional reserved)
Number of USB ports: 1
USB type: 3.0 MicroSD: Supports
Power characteristics
Input voltage level: 12/24VDC (6.5-36VDC wide voltage)
Room temperature power consumption: less than 6.5W when unloaded; less than 8W when fully loaded;