HPC-5000 management machine is a data networking device specifically developed for industrial application sites; Supports multiple DTUs/management machines/secondary development bare systems, supports multiple RS-232/485 serial ports, 15KV air discharge and 8KV contact discharge, serial port isolation protection, built-in terminal resistors can be set based on ARM9 architecture processor system clock frequency: 300MHz, built-in 512M NAND FLASH, 4-channel RS232/485 interface, 1-channel 4G/WIFI remote data transmission, 2-channel 10/100M adaptive Ethernet port, built-in RTC clock, supports -40~80 ℃ industrial wide temperature range
Hardware Architecture
Processor specification: 32-bit Arm92, main frequency 300Mhz
SDRAM specification: 128M, 2-port 64M
NAND Flash specifications: 128M/512M
system parameter
Kernel version: Linux buildroot 4.4
Compiler: gcc version 4.8.4 (GCC)
Software features: SSH, SCP, NTC and other serial port parameters
RS232/485 interface: 2/4/8 optional channels
Serial port signal: S - (B/RXD), S (A/TXD), GND
Serial port speed: 1200bps~115200bps
Flow control: No flow control XON/XOFF
Checkpoints: None, Even, Odd, Space, Mark
Data bits: 5, 6, 7, 8
Stop position: 1, 1.5, 2
Serial port protection: 15KV ESD protection, 2.5KV optoelectronic isolation protection
Serial port working mode: TCP Client, TCP Server, UDP
Virtual serial port: xport virtual serial port, supports 32-bit and 64 bit systems;
Serial port concurrency: Multiple serial ports can work in full duplex simultaneously, complement each other's effects, and can work under different serial port parameters
Support DTU mode: Supports heartbeat setting
Transparent transmission&customized protocol: default transparent transmission, optional customized forwarding protocol;
Network parameters
Ethernet ports: 2;
Network speed: 10/100Mbps adaptive, supports auto MDI/MDIX
Port protection: 15KV ESD, 2.5KV electromagnetic isolation protection
Supports IPv4 and IPv6 protocols
USB interface
Number of USB ports: 1
USB type: 2.0 MicroSD: HPC-5502 model supported
CAN port
Quantity: 1 piece
5.0 spacing terminal block
Power characteristics
Input voltage level: 12/24VDC (6.5-36VDC wide voltage)
Room temperature power consumption: No load less than 4.5W; Full load less than 5W; Reset button: Short press to restart, long press to restore factory settings; 4G LTE CAT1 (optional)
Frequency bands: GSM/EDGE B3/8, LTE FDD B1/3/5/8,LTE TDD B34/38/39/40/41
(U) SIM card interface: 3V/1.8V
Antenna interface: 50 Ω SMA antenna connector