1. OX-PN-MOD-221 can act as a slave on the Profinet side and as both a master and slave on the Modbus side. The communication between Modbus data and Profinet data adopts a mapping method, which is convenient to use.
2. Two RJ45 Ethernet interfaces, supporting 100BASE-TX, MDI/MDIX self detection, integrated Ethernet
Network switch, convenient for assembling PROFINET devices into a daisy chain.
3. ROFINET/V2.2 protocol, the gateway PROFINET side adopts real-time (RT) communication function, which complies with GB/T25105-2014 "Industrial Communication Network Fieldbus Specification Type 10: PROFINET IO Specification",
IEC61158-5- 10:2007 ,IDT。
4. Electromagnetic compatibility index:
EFT:level 4; class A
Surge: Level 2; class A
Static electricity: Level 3; class A
5. Supports Modbus RTU protocol, supports 01H, 02H, 03H, 04H, 05H, 06H, 0FH
10H function code.
6. MODBUS protocol interface can be either standard RS232 or RS485 interface (default RS485 interface), half duplex; Baud rates: 300, 600, 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K optional; Check bits (8-bit no check 1 stop bit, 8-bit even check 1 stop bit, 8-bit odd check 1 stop bit)
Optional: 8-bit, no checksum, 2 stop bits.
7. Other technical indicators
Maximum input/output data volume
① Max Input Bytes ≤1440 Bytes
② Max Output Bytes ≤1440 Bytes
1) Power supply voltage: 12-24V wide voltage supply, dual redundant power supply.
2) Rated power 3W (24V/125mA).
3) Environmental temperature:
Transportation and storage: -40 ℃~70 ℃
Working temperature: -20 ℃~60 ℃
4) Relative humidity at work: 5~95% (no condensation)
5) Dimensions: (length) 120mm x (width) 82mm x (thickness) 38mm
6) Installation method: 35mm guide rail
7) Protection level: IP20
8) Weight: Approximately 300g