听中国有声小说,怎样写网络小说,我欲封天txt下载

Communication management machine

2-channel communication management machine

4-channel communication management machine

8-channel communication management machine

16 channel communication management machine

Multi master and one slave serial port gateway
Industrial Ethernet Switches

Unmanned industrial Ethernet switch

Network management industrial Ethernet switch

Industrial fiber optic transceiver

Layer 3 core switch
Industrial optical transceiver

CAN bus optical transceiver

Industrial data optical transceiver

Industrial telephone optical transceiver

Industrial switch optical transceiver

Industrial multi service optical transceiver
Serial Server

1-channel serial port server

2-channel serial port server

4-channel serial port server

8-way serial port server
SFP optical module

Industrial grade 100Mbps

Industrial grade gigabit

Industrial grade 10G
Computer room environment monitoring
Intelligent collection IO module

8-way I/O control module

4-channel I/O control module

16 channel I/O control module

6-way I/O control module
5G/4G Industrial Wireless

Industrial 4G wireless router

Industrial 4G DTU

Industrial 5G Router
Industrial multi serial port card

PCI Multi Serial Port Card

PCI-E Multi Serial Port Card
Interface converter

Passive RS-232 to RS-485/422 converter

Active RS-232 to RS-485/422 converter

RS-485/422 repeater&isolator

RS-232 isolation protector

CAN bus relay isolation converter

RS-232 extender

RS-485 hub

USB to RS-232/485/422 converter
PROFINET Protocol Converter

Return to List

Industrial rail mounted 16 channel 4-20mA analog optical transceiver OX-PGA16

? Supports 4-20mA, 1-16 current channels; Or support 0~10V/0~5V, 1-16 voltage channels; 16 analog inputs and outputs can be combined arbitrarily. The 16 analog AD/DA channels use FPGA parallel read and write, non MCU sequential read and write mode, with a delay of less than 0.1ms per analog channel. Each analog channel reads high-speed sampling data through FPGA, with a sampling rate of 20K times/second, far higher than similar products in the market; ? Multimode fiber/single-mode fiber are optional. Multimode can transmit 2KM, single-mode can transmit 20KM, and ST/SC/FC interfaces are optional; ? Equipped with signal fault protection function; Full range display of electrical interface and fiber optic operation status. 4-20mA interface lightning protection meets IEC61000-4-5 (8/20 μ S) differential mode: 6KV, impedance (2 Ω); Common mode: 6KV, impedance (2 Ω) standard, supports wide range AC/DC input, supports internal isolation, redundant dual power input, power supply supports overload protection and anti reverse protection, meets industrial level four electromagnetic compatibility requirements; Super lightning protection function: lightning protection, can resist induced high voltage, surge protection, etc; Fanless efficient heat dissipation reduces repair time; IP40 shell protection level, able to withstand the test of harsh environments; ? Rail or wall mounted installation; Wide temperature type: working temperature -40 ℃~85 ℃;

OX-PGA16 adopts a large-scale FPGA design and unique technology, which can simultaneously support 1-16 channels of analog signals (current/voltage) to fiber optic relays. This device adopts dual power supply, high-performance FPGA programmable devices, no MCU processing, high-speed conversion, sampling frequency can reach 20KHZ, 12 bit AD conversion chip, solving the problems of electromagnetic interference, ground loop interference and lightning damage, greatly improving the reliability, safety and confidentiality of control signals, and also solving the problem of limited cable transmission distance.

PRODUCT MODEL	OX-PGA16
Product Function Description	Simultaneously transmit 16 analog interfaces over fiber optic cables
Business Port Description	1 fiber optic interface; 16 channel analog interface
power supply	Redundant dual power input: DC12-48V power consumption<5W overload protection: supported; Reverse protection: supported; Redundancy protection: Supports Connection terminal: 4-core 5.08mm spacing plug-in terminal Shell: IP40 protection level, made of aluminum alloy material Installation methods: rail installation, wall mounted installation
Product size	(Length x Width x Height) 133 * 120 * 50mm
weight	0.75kg/set

Fiber optic section
Optical port: 1
Fiber optic: single fiber, double fiber

Fiber optic interface: FC/SC/ST/LC (SFP)
Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single-mode

No relay transmission distance: 20~120Km

Typical transmission power: Single mode 1310/1550nm: ≥ -9dBm

Multimode 850nm: -18dBm

Multimode 1310nm: -25dBm

Acceptable sensitivity range: -28dBm~40dBm

Current analog quantity

Input/output range: 0~20mA (including 4~20mA)

Resolution: 12 bits

Sampling rate: 20K times/second

Time delay:<0.1ms

Maximum load capacity: 600 Ω

Input resistance: 125 Ω

Accuracy: 0.4% (at room temperature)

Voltage analog quantity

Input/output range: 0~10V (including 0~5V)

Resolution: 12 bits

Sampling rate: 20K times/second

Time delay:<1ms

Maximum load capacity: 600 Ω

Input resistance: 100 ΚΩ

Accuracy: 0.4% (at room temperature)

environmentindex
Working temperature: -40 ℃ -85 ℃

Storage temperature: -40 ℃ -85 ℃

Working humidity: 0% -95% (no condensation)

MTBF:>100000 hours

OX-PGA16規(guī)格書

Communication management machine

Industrial Ethernet Switches

Industrial optical transceiver

Serial Server

SFP optical module

Computer room environment monitoring

Intelligent collection IO module

5G/4G Industrial Wireless

Industrial multi serial port card

Interface converter

PROFINET Protocol Converter

Industrial rail mounted 16 channel 4-20mA analog optical transceiver OX-PGA16

Contact Us

Follow us

×